Beninca EVA 5/7

24v Intensive use electromechanical traffic barrier.

Integrated control panel with external release

EVA 5 – 24Vdc Traffic barrier – max 5m boom
EVA 7 – 24Vdc Traffic barrier – max 7m boom

24Vdc | Intensive Use

  • Right or left hand – the barrier can be easily re-handed
  • Top access to the control panel – easy and fast programming
  • Integrated dual height photocells into the barrier case (FTC.S)
  • 24 Vdc – Possibility of battery back up system
  • Amperometric sensing obstacle detection
  • **NEW** Fast acting manual release
  • Optional flashing lights – Boom arm and barrier case
  • 2 Adjustable mechanical stops
  • Simple, quick and reliable boom arm balancing system

http://benincauk.co.uk/product/eva/

Ozak GL A1

Power Requirements : 110/220 V. 60/50 Hz. AC (%±10) 24 V. DC at standby ~2W. max. ~65W.
Wing Features : Impact resistant 10 mm thick tempered glass (Opt. Polycarbon or Acrylic). Available in 550 mm or 900 mm standard lengths.
Body Features : Single piece 304-Grade (Opt. 316-Grade) satin finished and circular stainless steel body. Standard 20 mm thick natural granite (Star Galaxy Black) stone top lid for a decorative and aesthetical appearance.
Operation Temperature,
Humidity,IP Rating, MCBF
: -20°C to + 68°C (Opt. -50°C with heater unit), RH 95% non-condensing / IP 44 Indoor Model (For pipe wing versions IP 56 Option is avaliable.) / 1M Cycle
Control System : All inputs are opto-coupler protected. Compatible with all access control systems that provide dry contact or grounding outputs. Optional RS232/RS485/TCP IP control module is available.
Operation : Electronically controlled DC motor driven bi-directional system.
Emergency Mode : System allows free passage in emergency mode and in case of power failure.
Flow Rate : Wing Opening / Closing Time ~1,5 / – 2,5 sec.
Standard Features : Circular RGB LED direction and status indicator.
Optional Accessories
and Applications
: Remote control unit, interface unit for PC, RS485, RS232 and LAN, counter, audio-messaging system, floor mounting plate, separator, card reader pole. Exit Gate functionality to be used on Emergency Escape Routes as per EltVTR 1997-12 and DIN EN 60950-1:2011-01 (GL A1 FWZ)

Continue reading

Ozak 700 E

Power Requirements : 110/220 V. 60/50 Hz. AC (%±10) 24V. DC at standby ~4,4 W. max. ~12 W.
Arms : Ø40 mm x 2 mm 304-Grade stainless steel (Opt. 316 – Grade Stainless Steel).
Body Features : 1,5 mm 304-Grade (Opt. 316-Grade) stainless steel with brushed (Opt. Satin) surface.
Operation Temperature,
Humidity,IP Rating, MCBF
: -20°C to +68°C (Opt. -50°C with heater unit), RH 95% non-condensing / IP 54 Outdoor Model (Opt. IP 56) / 1M Cycles
Control System : All inputs are opto-coupler protected. Compatible with all access control systems that provide dry contact or grounding outputs. Optional RS232/RS485/TCP IP control module is available.
Operation : Manually operated bi-directional system (optional motorized) with dip switch selectable operational modes including controlled access on both sides, one side free (exit or entry) and other side controlled access and access restriction modes.
Emergency Mode : System allows free passage in emergency mode and in case of power failure.
Flow Rate : Capacity of Mechanism (Manual System): max. 97 passages/minute, Nominal: ~20 passages/minute
Capacity of Mechanism (Motorized System): max. 48 passages/minute, Nominal: ~16 passages/minute
Standard Features : Direction and status indicators
Optional Accessories
and Applications
: Remote control units, interface unit for PC, RS485, RS232 and LAN, counter, audio-messaging system, motor driven unit, automatic drop (retractable) arm, alarm sensor, heater positive unit, coin slot/intelligent coin system and coin box, card reader pole, pipe barrier (Separator), floor mounting plate, customised top covers to accommodate various accessories.

Continue reading

Ozak 500 E

Power Requirements : 110/220 V. 60/50 Hz. AC (%±10) 24 V. DC at standby ~4,4 W. max. ~12 W.
Arms : Ø40 mm x 2 mm 304-Grade stainless steel (Opt. 316 – Grade Stainless Steel).
Body Features : 1,5 mm 304-Grade (Opt. 316-Grade) stainless steel with brushed (Opt. Satin) surface.
Operation Temperature,
Humidity,IP Rating, MCBF
: -20°C to +68°C (Opt. -50°C with heater unit), RH 95% non-condensing / IP 54 Outdoor Model (Opt. IP 56) / 1M Cycles
Control System : All inputs are opto-coupler protected. Compatible with all access control systems that provide dry contact or grounding outputs. Optional RS232/RS485/TCP IP control module is available.
Operation : Manually operated bi-directional system (optional motorized) with dip switch selectable operational modes including controlled access on both sides, one side free (exit or entry) and other side controlled access and access restriction modes.
Emergency Mode : System allows free passage in emergency mode and in case of power failure.
Flow Rate : Capacity of Mechanism (Manual System): max. 97 passages/minute, Nominal: ~20 passages/minute
Capacity of Mechanism (Motorized System): max. 48 passages/minute, Nominal: ~16 passages/minute
Standard Features : Direction and status indicators
Optional Accessories
and Applications
: Remote control units, interface unit for PC, RS485, RS232 and LAN, counter, audio-messaging system, motor driven unit, automatic drop (retractable) arm, alarm sensor, heater positive unit, coin slot/intelligent coin system and coin box, card reader pole, pipe barrier (Separator), floor mounting plate, customised top covers to accommodate various accessories.

 

Continue reading

GV-EL124S Electric Strike

The GV-EL124S is a fail-secure electric strike. But it is field convertible from fail secure to fail safe. It can be mounted either right or left reversibly on the doorjamb, providing remote release of a locked door.Continue reading

GV-PCR310 Enrollment Reader

The GV-PCR310 is a USB card reader designed to assist with card enrollment to GV-ASManager. It reads and transfers the identification data of a detected card to GV-ASManager. The user can conveniently establish user accounts on GV-ASManager by inserting the cards in the GV-PCR310 Enrollment Reader.Continue reading

GV-DFR1352 Door Frame Card Reader

The GV-DFR1352 is a card reader designed to be installed on the door frame for recognizing identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use.Continue reading

GV-R1352 Card Reader

The GV-R1352 is a card reader designed to recognize identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-R1352 comes with a weather sealed and IP66 compliant housing for outdoor use.Continue reading

GV-RK1352 Card Reader

The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.Continue reading

GV-GF1921/22 Fingerprint Reader

The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only.Continue reading

Door King Access Plus

The Access Plus line combines essential features of our most versatile solutions with the ease and accessibility of computer programming and control. After installing the Access Plus Account Manager software on your PC, you can connect to the Access Plus system via a direct connection, LAN or the internet and begin to customize the system immediately. Set up time zones, add or delete access codes, set up email notifications, and even lock or un-lock a door with the click of the mouse button.
The Model 1810 Access Plus provides voice communication from the entry point between the resident/tenant and guest.
The 1810 AP is ideal for residential, multi-home, small gated community or apartment house applications. It features a built-in lighted directory that can be printed directly from the Access Plus Account Manager software.
DoorKing’s Access PlusAccount Manager Software is a powerful, flexible and easy to use computer program that allows you to manage access control in a variety of controlled access applications.

Door King Entry System

  • 1802 and 1802-EPD (Electronic Programmable Directory).
  • The 1802 for applications that do not require a directory, or where a separate directory exists.
  • The 1802-EPD includes a built-in electronic directory.
  • Limited Space Applications – Residential as well as commercial applications.
  • Dtmf tone output allows these systems to be used with PBX, KSU and telephone systems with auto-attendants

GV-AS100 Controller With Built-In Reader

Working as a standalone solution, GV-AS100 is a card reader and also a single door controller. It is possible to add one more card reader to GV-AS100 for entry and exit applications. GV-AS100 has the capability to store up to one thousand cards. When GV-AS100 is being used as a standalone unit the programming is either done on the keypad or from the software GV-ASManager through the RS-485 connection.
An economic solution for access control, GV-AS100 is suitable for controlling doors, parking gates and access to elevator call buttons.

Continue reading

GV-AS110 Controller With Built-In Reader

Working as a standalone solution, GV-AS110 is a card reader and also a single door controller. It is possible to add one more card reader to GV-AS110 for entry and exit applications. GV-AS110 has the capability to store up to one thousand cards. When GV-AS110 is being used as a standalone unit, the programming is either done on the keypad or from the software GV-ASManager through the RS-485 connection.

An economic solution for access control, GV-AS110 is suitable for controlling doors, parking gates and access to elevator call buttons.

Continue reading

GV – AS810 Controller

  • One-way control: 8 doors
  • Two-way control: 4 doors by Wiegand; 8 doors by Wiegand, RS-485 and network
  • 8 Wiegand card readers of 26 to 64 bits
  • 8 GV-Readers and GV-GF Fingerprint Readers through RS-485 and network
  • Built-in 16 inputs and 24 relay outputs
  • Suitable for controlling doors, parking gates and access to elevator call buttons
  • Support for tampering alarm

GV-EL202B Electric Bolt

The GV-EL202B is an electric bolt, featured with a stainless steel faceplate and a built-in voltage spike suppressor.

It supports lock sensor and door status sensor functions. The fail-safe electric bolt locks the door when the power is applied, and unlocks the door when the power is removed.

It can be applied to single-leaf or double-leaf doors.

Continue reading

PVA-828-C5-7

 Colour 7 inch touch screen Monitor

♦ Dustproof andanti-scrach Logo and buttons showed in Blue Backlight

♦ Case Material Monitor (Mirror-polished Panel)

♦ Installation: Wall-mounted

♦ Dimension: 225*155*28mm

GV-Reader 1352

  • 13.56 MHz for ISO14443A (MIFARE Classic)
  • Support Wiegand interface
  • Support RS-485 (9600bps) communication type
  • Red / Green LED and Beeper with auto / user mode setup

GV-CR420 Camera Reader

All-in-One Solution

GV-CR420 is a card reader with a built-in 4 MP wide angle IP camera. The card reader recognizes identification cards and grants access accordingly. The wide angle camera captures all angles of the entrance and transmits live view to GV-ASManager and GV-System through network connection. The all-in-one solution eliminates the need of installing and maintaining a separate camera in addition to the card reader.

Continue reading

GV-GF1911/12 Fingerprint Reader

The GV-GF Fingerprint Reader works with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system.

With the GV-GF Fingerprint Reader only, you can also enroll and manage users through the supplied Manager Enroll Card and Delete Card, along with optional MIFARE user cards.

Continue reading